DAN ARMSTRONG GUTARS
PG 13402: AMPEG 2001 AMG 1 GUITAR
cut for P-90 pickup at neck, 7 screw holes, notch for bridge, 2 knobs, switch, & jack, no graphic on guard
OEM Material: color 8 BWB: $41.00
PG 13406: AMPEG 2001 AMG 100 GUITAR
8 screws, 2 knobs, mini toggle, & jack
OEM Material: Color 41 tortoise: $77.00
PG 13410: AMPEG 1970 DAN ARMSTRONG GUITAR
THERE ARE 3 VERSIONS OF THIS GUARD WITH SLIGHTLY DIFFERENT SCREW HOLE & CONTROL LOCATIONS, SO WE NEED A TRACING OR THE ORIGINAL PICKGUARD TO WORK WITH TO INSURE EVERYTHING MATCHES THE HOLES IN THE BODY. THE ACRYLIC BODIES ARE VERY DIFFICULT TO REDRILL & TAP FOR SCREWS.
small notch for pickup, 7 screws, 2 knobs, switch, & jack
OEM Material: color 166 woodgrain with engraving: $100.00
DAN ARMSTRONG COPIES FROM JAPAN
PG 8494: ELECTRA MODEL 2246 EARLY 1970s DAN ARMSTRONG GUITAR COPY
7 screws, notch for pickup, 2 knobs, switch, & jack
OEM Material: color 166 woodgrain: $68.00
PG 768: CONRAD EARLY 1970s DAN ARMSTRONG BASS COPY
9 screws, cut in lower area for bridge, 2 knobs, switch, & jack
OEM Material: color 166 woodgrain: $68.00
PG 32557: IBANEZ 1970s DAN ARMSTRONG GUITAR COPY
2 humbuckers, 10 screws, 2 knobs, jack, & switch, also includes matching headstock overlay
ALSO SOLD UNDER "CSL" LOGO
OEM Material: color 166 woodgrain: $88.00
WE ALSO HAVE:
PG 2364: IBANEZ 1970s DAN ARMSTRONG GUITAR COPY
Just like guard above but different profile dimension & there is a 1/4" wall between the bridge humbucker & the bridge
OEM Material: color 166 woodgrain: $68.00
AMPEG BASS PICKGUARDS
PG 226: AMPEG 1967 AUB-1 SCROLL BASS
PLEASE CHECK THE PICTURE ABOVE CAREFULLY FOR SCREW HOLES, ETC.
Large oversize guard cannot fit on Pearl or Shell material; 12 screws, no pickup cut, rectangle opening for bridge, 2 knobs & jack, no logo on guard
OEM Material: color 122 blk/parchment 5-ply laminate: $87.00
PG 2262: AMPEG 1999 BRUCE JOHNSON AEB-2 SCROLL BASS
PLEASE CHECK THE PICTURE ABOVE CAREFULLY FOR SCREW HOLES, ETC.
Large oversize guard cannot fit on Pearl or Shell material; 19 screws, small soapbar pickup with 3 screw holes on each side, rectangle opening for bridge with 1 screw hole on each side, 3 knobs, no logo on guard
OEM Material: color 12 blk/parchment/blk laminate: $87.00
PG 13404: AMPEG 2001 ADA 4 BASS
8 screws, 2 knobs, switch, & jack
OEM Material: color 166 woodgrain with engraving: $100.00
PG 13414: AMPEG 1969 DAN ARMSTRONG BASS
7 screws, 2 knobs, & jack; Special Thanks to Eitan Thal for the use of his original 1969 guard!
OEM Material: color 166 woodgrain with engraving: $100.00
PG 135: AMPEG 1970 DAN ARMSTRONG BASS WITH SWITCH
7 screws, 2 knobs, switch, & jack
OEM Material: color 166 woodgrain with engraving: $100.00